Charlotte’s Top Rated Exterior Cleaning Company.

It takes about 2 hours to pressure wash a 720 square foot house. Residential pressure washing usually covers the roof, siding and garage – It’s also necessary to protect surrounding plants from chemicals which would kill them if watered by rain that comes into contact with the cleaned surface. That being said, you can’t just power wash everything that looks dirty. An energy-efficient first step is a good scrubbing with a deck brush or stiff push broom to knock off larger debris before putting it back under spray.

Special thanks to Brown’s Pressure Washing for providing this information!

The short answer is yes – indeed, pressure washing brick is very common, and to do so effectively you should apply a mix of hot water and detergent.

With the advent of improved technologies in cleaning products over the years, it’s become easier than ever before to maintain both brick and many other surfaces. Today there are two main methods used for such maintenance: pressure washing brick or applying some type of liquid cleaner on cloths. Which option you choose has as much to do with how often the surface will need cleaning as anything else – what one person might use once per year another person might use monthly or more frequently depending on their needs and environmental factors.

This information was provided by Moores Pressure Washing.

Power washing is, by far, the best way to clean concrete. This method takes all of your dirt and grime off so that your concrete looks like it just got dry-cleaned. It entails setting up a hose with a power jet nozzle onto your surface and blasting away all of the grime until you’re satisfied with how clean it looks. It’s important to know that power washing concrete patios removes all organic materials that might be on your surface or embedded in its structural building blocks (you should act similarly if you were stripping paint).

We’d like to thank Peters Pressure Washing for this information.

Power washing is, by far, the best way to clean concrete. This method takes all of your dirt and grime off so that your concrete looks like it just got dry-cleaned. It entails setting up a hose with a power jet nozzle onto your surface and blasting away all of the grime until you’re satisfied with how clean it looks. It’s important to know that power washing concrete patios removes all organic materials that might be on your surface or embedded in its structural building blocks (you should act similarly if you were stripping paint). We’d like to thank Peters Pressure Washing for this information.

The cost to pressure wash a driveway varies depending on how much work needs to be done and the labor rate in your area. Placing the quote request in a location near you will likely give you an estimate of how much it would cost.

Pressure washing a driveway is one instance where dirt and grime can just be washed away with water, but this won’t always stop oil stains from being left behind. Professionals might have special chemicals for this purpose, but these can get pricey when considering quantities required for large driveways.

This information was provided by Wise Guys Pressure Washing.

Yes, power washing brick patio can be done. However, you need to take caution not to damage them with the high-pressure water. You might want to try a lower pressure setting first and see if that is adequate for removing the dirt and debris. If it’s not, then increase the pressure gradually until you see results. Always be careful to avoid spraying the water directly onto the brick pavers themselves as this can cause etching or pitting. Instead, concentrate the spray on the spaces in between the pavers to help blast away any built-up dirt and gunk.

Soft washing is a process of using multiple high-pressure jets of water for cleaning which utilizes chemicals that dissolve and loosen dirt and other debris. The water breaks up dirt into small particles, which can then flow without resistance when dry or in motion. Pressure washing uses powerful, pressurized streams of water at the surface in order to mechanically remove tough stains such as bacteria and algae from surfaces such as roofs and driveways.

Special thanks to our friends at Blue Flamingo Soft Wash for this information!

Soft washing exterior cleaning is good for removing built-up dirt, grime, and mildew from the surfaces of homes. It’s a gentle but effective way to clean the exterior without using harsh chemicals or high-pressure washers that can damage surfaces.

Many homeowners choose to soft wash house at least once a year to keep it looking its best. It’s also a great way to prepare your home for painting or staining, as it removes all the built-up gunk that can prevent paint or stain from adhering properly.

This information was given to our friends at Glass Act Pro Wash.

One of the best ways to get rid of roof algae and mold is to use a soft wash roof cleaning system. This type of system uses low pressure water and mild detergent to remove the dirt, grime, and growth from your roof without causing any damage to your roof tiles or shingles.

Thanks to Gordon Exterior Cleaning for these roof cleaning tips!